weldable steel pipe
"
La résistance électrique a soudé l'air Heater Tubes As de tuyau d'acier 2556-2000 longueur de 1000 - de 12000mm
As2556-2000 Electric resistance welded steel air heater tubes Products Description 1 SCOPE This Standard specifies requirements for electric resistance welded steel tubes in the as-welded condition intended for use in air heaters. NOTE: Purchasing guidances are given in Appendix A. 2 APPLICATION This Standard is intended as a design guide for use by manufacturers of air heating exchangers. 3 REFERENCED DOCUMENTS The following Standards are referred to in this Standard: AS or
6 - la tuyauterie en acier soudable de 168mm OD, effort soulagé a recuit le tube en acier de mur épais
Product Name: Carbon Steel Welded Tube Type 5 DOM Tube ASTM A513 / ASME SA513 Stress Relieved Annealed Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing has superior concentricity and a high degree of uniformity in wall thickness. DOM Steel
Pieds de longueur soudés par carbone lisse ASTM du tuyau d'acier 17 - 24/type 5 les DOM d'ASME A513
Product Name: ASTM / ASME A513 Carbon Steel Welded Tube Type 5 DOM Tube Length 17-24 Feet Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing has superior concentricity and a high degree of uniformity in wall thickness. DOM Steel Tubing, is a
Précision autour de tuyauterie en acier soudable longueur de 1 - de 200m pour le condensateur GB/T24187
GB/T24187 Cold Drawn Precision Welded Steel Coil Tubes for Condenser Spec: Material:C Si Mn P S Size Range:OD:3.18-18mm WT:0.5-1.2mm General Length:1-200m Tolerance: According to the following tables or customers’ request. Table 1 Outer diameter, wall thickness and theoretical weight OD/mm WT/mm 0.30 0.40 0.50 0.60 0.65 0.70 0.80 0.90 1.00 1.30 theoretical weight /(kg/m) 3.18 0.0213 0.0274 0.0330 4.00 0.0274 0.0355 0.0432 0.0503 4.76 0.0330 0.0430 0.0525 0.0616 0.0659 0.0701
Tubes soudés étirés à froid des tuyaux soudés par précision CDW d'amortisseur avec la surface intérieure douce
Product Name: 32mm × 1mm Shock Absorber Precision Welded Pipes CDW Cold Drawn Welded Tubes with Smooth Inner Surface 1. Size Range: OD: 6-100mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 2. Stable Quality with Comeptitive Price 3. Good Extending and Bending Ability EN10305-2 Welded Precision Steel Tubes, is produced by cold drawing over mandrel and die on the ERW welded steel tube, to achieve better tolerance and good concentricity, both outside and inside weld seam is
Tubes d'acier allié de SA423/A423M Electric Welded Low
SA423/A423M Grade 1 , Grade 2 , Grade 3 electric welded steel pipe , Electric-Welded Low-Alloy Steel Tubes Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes1 1. Scope 1.1 This specification2 covers minimum-wall-thickness, seamless and electric-resistance welded, low-alloy steel tubes for pressure containing parts such as economizers or other applications where corrosion resistance is important. 1.2 The tubing sizes and thicknesses usually furnished
La précision a soudé le matériel E195/E235/E355 de tuyau d'acier dessiné au-dessus d'un mandrin
1. Product Name: Welded Precision Steel Pipe EN10305-2 E195 E235 E355 Drawn Over a Mandrel Steel Pipe 2. Size Range: OD: 6-100mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. Good Extending and Bending Ability EN10305-2 Welded Precision Steel Tubes, is produced by cold drawing over mandrel and die on the ERW welded steel tube, to achieve better tolerance and good concentricity, both outside and inside weld seam is completely removed
Tuyau soudé par acier au carbone de rond de programme de 8 pouces ASTM A36 pour la livraison liquide de basse pression
Products Description New Era ASTM A36 Round 8 inch Schedule 40 Hot Galvanized Carbon Steel Pipe for Low Pressure Liquid Delivery Key Word Hot Galvanized Carbon Steel Pipe Standard GB / T3091, GB/T13793, GB/T6728, BS1387, EN10219, ASTM A53/A53M, PNS, Q/12JH4855, Q/12JH5081 Material Q195, Q215, Q235, Q345, S185, S235, S355, SS330, SS400, 10#, 20#, 35#, L175, L210, L245, L290, L320, L360, L390, L415, L450, L485, L555,etc Size OD: 1/2" to 24" (19mm-610mm) WT: 0.8-30mm Length: 1
Précision soudée E275 décoration d'E355 de tube en acier de précision haute liquide/de gaz transport
EN10305-2 E155,E195,E235,E275,E355 Welded Cold Drawn DOM Steel Tubes Steel Grade/Steel Material: E155 E195 E235 E275 E355 Delivery Condition: 1 BK Cold finished(hard) 2 BKW Cold finished(soft) 3 BKS Cold finished and stress-relieved 4 GBK Annealed 5 NBK Normalized Size Range: O.D.:6-350mm W.T.:1-35mm L:max12000mm Characteristic: Good concentricity Good OD and ID tolerance High precision Stable quality Smooth roughness DOM Steel Tube Production Process: Raw material → Incoming
